Bianco Dolomite Octagon with Gray Dots Mosaic Polished 1 piece

Material Inspection

• Natural Variations: Due to the natural characteristics of marble, expect variations in color, pattern, texture, and veining.
• Pre-installation Inspection: Before installation, check all tiles for any defects or damage like chipped edges or broken pieces. No adjustments or services will be offered after installation begins.

Installation Instructions

1. Dry-Fit First: Practice laying out the pattern before applying mortar. This helps visualize the final look and manage tile variations.
2. Thinset Mortar:
   • Use white thinset mortar to avoid color changes in the tile.
   • For faster work, use a rapid curing thinset.
3. Adhesive Application:
   • Apply only as much adhesive as can be covered within 10-15 minutes.
   • Ensure grout joints are at least 1/16” wide.
   • Use a 3/16" or 1/4" square notch trowel.
   • Use the flat side of the trowel to smooth ridges before laying the tile.

Grouting Guidelines

• Use non-sanded grout to avoid scratching the stone.
• Test a small area before full application to ensure the stone won’t scratch.
• Fill grout joints completely and clean off excess grout as you go. Don’t let grout harden fully before cleaning.
• Grout haze should never be cleaned with acids.
• Smooth out grout joints with a damp sponge during final cleaning.
• Apply grout release before grouting to ease cleaning and protect from grout stains.

Sealing

• After installation and grouting, apply a high-quality breathable stone sealer to protect against water absorption, efflorescence, and stains.
• For enhanced color, a color enhancer can be applied after grouting.
• Re-seal as needed, especially if the stone darkens over time.

Cutting

• Use a wet-saw with a continuous rim diamond blade designed for marble to get a clean cut.
• Avoid using “turbo” or notched blades, as they can chip the edges of the marble.

Care and Maintenance

• Clean with a neutral cleaner, stone soap, or mild dishwashing detergent mixed with warm water.
• Rinse thoroughly and dry with a soft cloth to avoid streaks.
• Avoid acidic cleaners (like those with lemon or vinegar) and abrasive cleaning products when cleaning marble or limestone.