Bianco Dolomite Octave with Gray Dots Mosaic Polished 1 piece

Material Inspection

• Natural Variations: Bianco Dolomite is a natural stone, so expect variations in color, pattern, texture, and veining. These may differ from what is pictured.
• Pre-Installation Inspection: Carefully inspect the material for defects like chipped edges or broken pieces. No adjustments or service will be provided once installation begins.

Installation Guidelines

1. Dry-Fit First: Lay out the pattern without adhesive to visualize the final look and ensure proper cuts and piece placement, especially due to variations in the tiles.
2. Thinset Mortar:
   • Use white thinset mortar to maintain the color of the tile.
   • A rapid curing thinset is recommended for faster installation.
3. Adhesive Application:
   • Only apply adhesive that can be covered within 10-15 minutes.
   • Ensure a grout joint of at least 1/16", avoiding a butt set.
   • Use a 3/16" or 1/4" square notch trowel.
   • Smooth the ridges of the mortar using the flat side of the trowel before placing the tiles.

Grouting Instructions

• Use non-sanded grout to prevent scratching of the stone.
• Test a small area first to confirm the grout will not damage the tile.
• Fill the grout joints completely, leaving no pits or voids.
• Clean excess grout as you work, and avoid letting it harden.
• Avoid using acids to clean grout haze.
• Use a damp sponge for the final cleaning and smoothing of grout joints.
• Apply grout release prior to grouting to help with cleaning and protect against staining.

Sealing

• After installation and grouting, seal the stone with a high-quality breathable stone sealer to prevent water absorption, efflorescence, and staining.
• A color enhancer can be used to highlight the stone's natural color after grouting.
• Reseal the stone when necessary, especially if it begins to darken.

Cutting

• For clean cuts, use a wet-saw with a continuous rim diamond blade designed for cutting marble.
• Avoid using “turbo” or notched blades, as these can cause chips and rough edges.